• Top Plate for V-RAPTOR
• Universal Sliding Top Handle

The Side cage bracket for the RED V-RAPTOR camera can be utilized on either the left or right side of the camera.

It features industry standard threaded holes and a rosette, making it to work flawlessly with our wooden handgrips.

Moreover, this bracket doubles as a NATO rail, allowing it to be paired with our renowned viewfinder brackets for optimal performance.

• 2x Side cage bracket

• Top Plate for V-RAPTOR XL
• Universal Sliding Top Handle

The mount has several industry standard threaded holes, and is the perfect solution when an Easyrig is been used.

BSC Expo 2023
Battersea Evolution, London
Chelsea Bridge Gate, Battersea Park, Queenstown Road
SW11 4NJ London

Register your visitor pass Free Of Charge here

The handgrip of the Handle is made from walnut, which not only looks and feels luxurious, it provides you with a lot of ergonomic benefits as well.

The Handle is equipped with many industry standard 1/4" and 3/8" threaded holes for mounting accessories.

A short (60 mm long) attachment point for anything that clamps onto NATO rails.

The short can be mounted onto any 1/4" industry standard hole.

Extender (50 mm) for the Universal Sliding Top Handle system.

Can be used on the front, top, side or rear of our Sliding Top Handle. Attaches directly to any 3/8" industry standard hole.

Can be used on the front, top, side or rear of our Sliding Top Handle. Attaches directly to any 3/8" industry standard hole.

Attachment point for 15 mm rails to the Universal Sliding Top Handle.

Can be used on the front, top, side or rear of our Sliding Top Handle. Attaches directly to any 3/8" industry standard hole.

Canon R-mount to PL adapter MKII excluding 15 mm rail support. The separate Vocas PL cap is included.

This product replaces the 0900-0018.

Canon R-mount to PL adapter MKII including 15 mm rail support. The rail support provides support for the lens mount, especially recommended when using heavy PL lenses.

This product replaces the 0900-0017

Canon R-mount to PL adapter MKII kit including support for RED KOMODO. This kit requires the our side cage kit for RED KOMODO to be mounted on the camera.

This kit replaces the 0900-0031

Canon R-mount to PL adapter MKII kit including support for Canon EOS C70. This support attaches directly to the camera, offering maximum stability for your PL lenses.

This kit replaces the 0900-0033

When the optional Sony eyepiece is used on the Sony FX6 LCD monitor, this bracket offers additional stability and an adjustable friction needed to support the extra weight of the eyepiece.

This kit adds a robust (110 mm long) 8T to 15 mm bracket based upon a NATO rail.

The kit consist off the following items:

This bracket can be attached to our cheese plate for Sony FX6 (0350-1376), allowing the camera to be used on its side in "Portrait mode".

Alternatively, this plate can be used as a larger side plate at the right side of the camera. With several Arri style 1/4" and 3/8" threaded holes.

A follow focus kit which is based on our signature walnut products. These do not only make it look beautiful but also improve ergonomics because the wood allows maximum grip, even in humid environments.

Further adding to the ergonomics is our included and adjustable palm support. Making it possible to rest the camera on your hand-palm, allowing a stable shot even while adjusting focus.

The kit is optimized, by its 1:1,75 gear ratio, for the long focus-throw of CINE style lenses.

A “Basic” but very complete follow focus kit, all you need to start working after unboxing is included in this kit which is optimized for the long focus-throw of CINE style lenses.

This optimization is achieved by the 1:1,75 gear ratio, allowing you to adjust focus with the precision you need.

The kit consist off the following items:
Vocas MFC-2 15 mm snap-on bracket 0500-1010
Vocas MFC-2 Gear unit 1:1.75 ratio 0500-1110
Vocas MFC-2/6 Knob standard 0500-1201
Vocas MFC-2 Drive gear M0,8/40T 0500-0601

A “Basic” but again very complete follow focus kit, all you need to start working after unboxing is included in this kit which is optimized for the short focus-throw of DSLR- and ENG style lenses.

This light weight and compact rail support has an adjustable rail height, and is compatible with cameras with a distance of 68 mm to 90 mm between the lens mount and the camera base.

The compact nature of the FCR-15 support gives the user a lot of flexibility during a day of shooting. No matter either that’s in a tripod, shoulder-, chest- or hand held setup. The support is equipped with an ARCA dovetail plate; offering quick release, sliding and balancing options for the camera.

The kit consists off the following items:
Our FCR-15 0350-3000
a Body rosette adapter for Sony FX6 0350-2200
an Adjustable handgrip extender for Sony FX6 0390-0045

This kit allows the user to relocate the Sony FX6 side handgrip to a comfortable position when the camera is used as a shoulder camera.
Our body rosette adapter replaces the original Sony rosette and changes it from the Sony standard to a universal standard.

The kit consist off the following items:
Vocas Body rosette adapter for Sony FX6 0390-0080
Vocas Adjustable handgrip extender for Sony FX6 0390-0045

This kit is essential when you are looking to apply heavy PL mount lenses on the EOS C70. The adapter allows PL mount lenses to be adapted to the RF mount on the camera. For additional stability we made the set complete by included a dedicated PL adapter support.

The kit consists off the following items:
Our popular R-mount to PL adapter (0900-0018)
a PL adapter support for Canon C70 (0900-0032)

For additional ruggedness and stability while working with PL lenses on the EOS C70 we have designed a dedicated PL adapter support that makes optimal use of the mounting options on the camera.

Available in several setups and kits, but we feel for this compact camera this particular kit would be an equally compact setup.