Home > Products > Matteboxes > DV > Accessories > Sony PMW-EX1 Print this page

Sony PMW-EX1

 


General comments:

-Please notice that due to the construction of the camcorder with the LCD under the built in microphone, the filtertrays have to go into the mattebox from the bottom side. For rotation of the filter tray it is necessary to open the LCD.

-Both the MB-210 and MB-250 work fine together with the Century  tele converter (0HD-16TC-EX1).
-Because of  the tulip shaped front, the Sony wide-angle converter (VCL-EX0877) cannot be used with any 4"X4" mattebox. (Such as the Vocas MB-2XX and MB-3XX.)

Please see the accessories page for more options for this camera.

Sony PMW-EX1 with clip-on mattebox:

For optimal compact en lightweight operation the Vocas MB-210 or MB-250 mattebox can be used as clip-on mattebox.

MB-210 clip-on kit #0210-0077
consisting of:
-MB-210 mattebox (#0200-0210).
-Screw-in adapterring 105mm to M77 (#0250-0144).

MB-250 clip-on kit #0250-0077
consisting of:
-MB-250 mattebox (#0200-0250).
-Screw-in adapterring 105mm to M77 (#0250-0144).

For the Century wide-angle converter (0HD-75CV-EX1) or tele converter (0HD-16TC-EX1) no ring is required. 

MB-210 clip-on kit #0210-0077

MB-250 clip-on kit #0250-0077


Care should be taken when using a clip-on mattebox to avoid damage to your equipment. We do not recommend the use of a clip-on mattebox in conjunction with a wide angle converter. Vocas is not responsible for any damage caused to your equipment through the use of a clip-on mattebox.


Sony PMW-EX1 with mattebox on 15mm rail support:

For better support and safety for your camera, we recommend using a 15 mm matte box support.
This support has a flat base and allows the use on all tripods.

MB-210 rail support kit, #0210-1077
consisting of:
-MB-210 mattebox (#0200-0210).
-Accessory kit G-77 (#0255-1077).

MB-250 rail support kit, #0250-1077
consisting of:
-MB-250 mattebox (#0200-0250).
-Accessory kit G-77 (#0255-1077).

MB-210 rail support kit, #0210-1077


MB-250 rail support kit, #0250-1077


Sony PMW-EX1 with the Vocas Manual Focus Controller MFC-1:

For optimal focusing comfort with the Sony PMW-EX1 we have put together the following MFC-1 kit.

Kit "MFC-EX1", Item #0500-2250.
For Sony PMW-EX1.

This kit consists of:
-Manual Focus Controller, MFC-1 Item #0500-0001.
-Drive Gear tooth size M0,8 36 teeth Item #0500-0100.
-Gear ring for Sony PMW-EX1. Item #0500-0250.

 


MB-250 rail support kit, #0250-1077 + MFC-EX1


MB-210 rail support kit, #0210-1077 + MFC-EX1